The bidirectional eNet SMART HOME radio system enables smart networking and control of building services using a single platform. Light, heating, blinds, movement detectors and numerous other functions: The brand solutions of the eNet SMART HOME Alliance partners can be integrated into the wireless system across all manufacturers.
You have the choice. Control your home using wall transmitters,
touch display, tablet or smartphone. Classically on the wall or
mobile on the move. One does not exclude the other.
F 40 and F 50 wall transmitters
You can switch, dim, control blinds and recall scenes with the JUNG eNet wall transmitters. Regardless of the existing electrical installation, the battery-operated wall transmitter can be mounted on walls and smooth surfaces – exactly where you want it. JUNG eNet wall transmitters are available in F 40 and F 50 versions.
The eNet wall transmitters also control the basic functions without the eNet Server. This means that you can also implement smaller individual room solutions without an eNet Server as the eNet transmitters and receivers form a bidirectional network. In the case of a comprehensive eNet SMART HOME installation including eNet Server, the system will also function if your home network is not available.
The eNet SMART HOME app is recommended if you want to make full use
of all the possibilities of smart home technology. With the eNet
SMART HOME app, you have access to all devices in your home at any
time via smartphone and tablet or via a stationary touch
eNet SMART HOME hand-held transmitter Show
The eNet SMART HOME hand-held transmitters are the mobile alternative to permanently installed wall transmitters. Large buttons make them easy and convenient to use.
eNet SMART HOME energy sensors Show
The energy sensors measure power and energy consumption. They send event or time controlled measured value telegrams to the eNet Server. The values are displayed in the eNet app.
eNet SMART HOME physical sensors Show
Physical sensors convert non-electrical input signals such as temperature, illuminance, etc. into electrical output signals. In this way, physical variables can be integrated into intelligent building technology.
eNet radio repeater intermediate connector Show
The radio repeater intermediate connector receives and repeats eNet radio telegrams. The range of radio transmitters and actuators can be extended in this way.
eNet SMART HOME universal transmitter Show
Conventional 230 V switches can be made to function wirelessly with the compact universal transmitter. The universal transmitter transmits switching, dimming, blind movement and scene commands to radio actuators in the eNet system for this. It can be controlled by push-buttons, switches, blind push-buttons or blind switches or other devices with push-button or switching contact.
System attachments for the JUNG switch ranges
Make the light and blind switches in an existing electrical installation smart? That is simple. Conventional light switches can easily be replaced with the JUNG eNet centre plate Universal with radio receiver. Without having to chisel walls or install new cables.
The replacement of conventional blind buttons is just as simple. The specialist replaces the existing switch with a blind centre plate with radio receiver and configures the system.
eNet SMART HOME flush-mounted actuators Show
Flush-mounted actuators receive their commands from eNet transmitters and convert them into actions. They are suitable for installation in flush wall boxes. An appropriate installation adapter is available for installation in false ceilings or canopies.
Switch / push-button actuators have a relay for switching loads such as lamps on and off. Many different loads can be connected, such as incandescent lamps, HV or LV halogen lamps, fluorescent lamps, compact fluorescent lamps, energy-saving lamps, LED lamps, fan motors, provided that the technical data of actuator and load match.
eNet SMART HOME switch / push-button actuator intermediate connector Show
Wireless intermediate connectors can be used mobile wherever a switching function for the lighting should be controlled. For example, floor or desk luminaires can be integrated into the radio control system with intermediate connectors.
eNet SMART HOME actuators for rail mounting Show
Actuators for rail mounting receive their commands from eNet transmitters and convert them into actions. For easy one-man commissioning, the JUNG eNet actuators for rail mounting have an operating mode switch, a local operating button and appropriate indicator LEDs.