Online Catalogue

Universal touch dimmer insert LED

Product characteristics

Device works according to the leading edge phase control or trailing edge phase control principle
Automatic or manual setting of the dimming principle suitable for the load
Display of the set operating mode by means of LED
Device can be operated without neutral conductor
Switch-on via bulb-preserving soft start
Switch-on with last brightness or saved switch-on brightness
Switch-on brightness can be saved permanently
Minimum brightness can be saved permanently
Connection of satellite units possible
Electronic short-circuit protection with permanent switch-off after 7 seconds at the latest
Electronic over-temperature protection
Test operation for functional test
Power extension possible by means of power boosters (ref.-no. ULZ 1755 REG)
Optional accessory: compensation module LED, ref.-no.: KM LED 230 U

Covers:
Centre plate: .. 1700 .., .. 1701 ..
Universal timer Bluetooth: .. 1751 ..
Standard timer with display: .. 1750 D ..
Standard automatic switch 1.1 m: .. 17180 ..
Universal automatic switch 1.1 m: .. 17181 ..
Standard automatic switch 2.2 m: .. 17280 ..
Universal automatic switch 2.2 m: .. 17281 ..
Motion and presence detector: DWPM 17360 ..

Reference number

Information

1711 DE

INFO

Operating instructions	EN (533.6 kB)
Tendering text	EN (2.7 kB)
EC Declaration of Conformity	EN (48.8 kB)
Product data sheet	EN
Other Languages

*Price on request

Technical data

Rated voltage:	AC 230 V ~
Mains frequency:	50/60 Hz
Stand-by power depending on the cover:	approx. 0.1 ... 0.5 W
Power loss:	approx. 4 W
Ambient temperature:	−5 ... +45 °C
Connected load at 25 °C
Incandescent lamps:	20 ... 420 W
HV halogen lamps:	20 ... 420 W
Electronic transformers:	20 ... 420 W
Electronic transformers with LV LED:	typical 20 ... 100 W
Inductive transformers:	20 ... 420 VA
Inductive transformers with LV LED:	typical 20 ... 100 VA
Dimmable HV LED lamps:	typical 3 ... 100 W
Dimmable compact fluorescent lamps:	typical 3 ... 100 W
Operating mode LED trailing edge phase control: Rated power for HV LED lamps, typ. 3 ... 200 W, electronic transformers with LV LED typ. 20 ... 200 W.
Ohmic-capacitive:	20 ... 420 W
Capacitive-inductive:	not permitted
Ohmic-inductive:	20 ... 420 VA
Ohmic and HV LED:	typical 3 ... 100 W
Ohmic and CFL:	typical 3 ... 100 W
Amplifiers:	see instructions for amplifier
Connection:	screw terminals
single wire:	1 x 0.5 ... 4.0 mm² 2 x 0.5 ... 2.5 mm²
stranded without ferrule:	1 x 0.5 ... 4.0 mm² 2 x 0.5 ... 2.5 mm²
stranded with ferrule:	1 x 0.5 ... 4.0 mm² 2 x 0.5 ... 1.5 mm²
Number of satellite units
Satellite insert 2-wire 1720 NE:	unlimited
Satellite insert 3-wire 1723 NE:	10
Rotary satellite insert 3-wire 1733 DNE:	10
Push-buttons:	unlimited
Total length of extension unit cable:	max. 100 m
Total length power cable:	max. 100 m
Approvals:	VDE