Назад Общая информация
Здесь Вы найдете общую информацию по продукции JUNG, такую как:
описание продукта, прайс-лист, ПО, обзорная и техническая
документация. Вся информация разбита по тематике, что существенно
облегчит Ваш поиск.
Тип
-
Software
- Switchmanager
- Visualisation software Facility Pilot
- Door communication
- CAE Symbols/Macros for WSCAD and E-Plan
- KNX product database complete
- Software Smart Panel 9"
- FAPV-SERVER-REG Software-Update
- Configuration Software Facility Pilot Navigator
- Smart Pilot FAP Software-Update Windows® XP embedded
- Software Smart Panel 5"
-
Musterprojekte
Software
Switchmanager
Switchmanager 2017
Full version, incl. Pricelist Jan. 2017
Full version, incl. Pricelist Jan. 2017
Visualisation software Facility Pilot
WARNING!
If you use Windows 7 (32 and 64 Bit), Windows 8, 8.1 and Windows 10 (32 and 64 Bit), you will need the Falcon driver 2.1 or higher.
On the Smart Pilot devices you can only use the RS232 and USB connection if you are using the Falcon driver 2.0. If you want to use the KNXNetIP connection you will have to install the Microsoft .NET Framework 2.0 Service Pack 2 (File: NetFx20SP2_x86.exe). You can download this file NetFx20SP2_x86.exe from the Microsoft Homepage directly. The recent setup for .NET 3.5 is already installed and includes the .NET 2.0 SP2 already.
If you use Windows 7 (32 and 64 Bit), Windows 8, 8.1 and Windows 10 (32 and 64 Bit), you will need the Falcon driver 2.1 or higher.
On the Smart Pilot devices you can only use the RS232 and USB connection if you are using the Falcon driver 2.0. If you want to use the KNXNetIP connection you will have to install the Microsoft .NET Framework 2.0 Service Pack 2 (File: NetFx20SP2_x86.exe). You can download this file NetFx20SP2_x86.exe from the Microsoft Homepage directly. The recent setup for .NET 3.5 is already installed and includes the .NET 2.0 SP2 already.
Manual for activation of the Visualisation Server.
Setup for English FAP 3.2 Planner Version.
The software can be installed and tested for 20 days. If you want to activate the product, you have to purchase it to get a serial number (with or without voucher). With that serial number you can generate a system code of your PC. Now you can request the final activation code. To go through this process please use the following link:
https://www.jung.de/software
For the time being this section is in German, asap it will be translated into English.
The software can be installed and tested for 20 days. If you want to activate the product, you have to purchase it to get a serial number (with or without voucher). With that serial number you can generate a system code of your PC. Now you can request the final activation code. To go through this process please use the following link:
https://www.jung.de/software
For the time being this section is in German, asap it will be translated into English.
FAP Navigator (General Navigator description)
The JUNG Facility Pilot Navigator is a configuration tool for the JUNG Facility Pilot visualization.
A basic visualization project can be designed with the Navigator. The JUNG GUI control elements can be used for navigating room orientated through the functions like lighting, blinds and heating.
To use these work sheets in a visualization, an "empty" visualization project (including a process model project) has to be prepared within Facility Pilot, thus basic knowledge of the Facility Pilot is a necessary precondition.
The basic visualization can be edited and extended with the tools of the Facility Pilot according to customer needs.
The software can be downloaded via the Software Licensing portal on our webpage. You can run the Navigator in a demo mode free of charge, to generate work sheets you have to activate it by a special voucher. Please contact your JUNG distributor.
For the processing of the ETS-group addresses two options are offered in the Navigator:
1) Using the JUNG group address structure (adjusted to residential buildings).
Advantages of this way:
- Less time consuming, due to the automatic connection of the group addresses
- The Navigator is generating all necessary ETS group addresses incl. acknowledgements automatically, hence no additional work in the visualisation editor.
2) Using individual group addresses from ETS. Then the connections have to be done manually in the visualisation editor.
The JUNG Facility Pilot Navigator is a configuration tool for the JUNG Facility Pilot visualization.
A basic visualization project can be designed with the Navigator. The JUNG GUI control elements can be used for navigating room orientated through the functions like lighting, blinds and heating.
To use these work sheets in a visualization, an "empty" visualization project (including a process model project) has to be prepared within Facility Pilot, thus basic knowledge of the Facility Pilot is a necessary precondition.
The basic visualization can be edited and extended with the tools of the Facility Pilot according to customer needs.
The software can be downloaded via the Software Licensing portal on our webpage. You can run the Navigator in a demo mode free of charge, to generate work sheets you have to activate it by a special voucher. Please contact your JUNG distributor.
For the processing of the ETS-group addresses two options are offered in the Navigator:
1) Using the JUNG group address structure (adjusted to residential buildings).
Advantages of this way:
- Less time consuming, due to the automatic connection of the group addresses
- The Navigator is generating all necessary ETS group addresses incl. acknowledgements automatically, hence no additional work in the visualisation editor.
2) Using individual group addresses from ETS. Then the connections have to be done manually in the visualisation editor.
Template for the KNX editor of Facility Pilot
Template for ETS 4 group address import
Facility Pilot Navigator system description / guide-line
Releasenotes
FAP 3.6.2
Update of the Facility Pilot from 3.04 to 3.6.2 for:
FAP Software-Update Windows® 7 embedded
FAP-PL-3-GB
FAP-50-3-GB
FAP-300-3-GB
FAP-FULL-3-GB
FAP Software-Update Windows® 7 embedded (SPK10/15/19FAPVDSW from SN 10141395)
Not valid for the Update of FAP2 to FAP3
Not valid for the KNX Flat panel PC 15”, ref.no. PCT15FAPV-GB
Update of the Facility Pilot from 3.04 to 3.6.2 for:
FAP Software-Update Windows® 7 embedded
FAP-PL-3-GB
FAP-50-3-GB
FAP-300-3-GB
FAP-FULL-3-GB
FAP Software-Update Windows® 7 embedded (SPK10/15/19FAPVDSW from SN 10141395)
Not valid for the Update of FAP2 to FAP3
Not valid for the KNX Flat panel PC 15”, ref.no. PCT15FAPV-GB
FAP 3.6.2 Client
Update of the Facility Pilot Client from 3.04 to 3.6.2 in English
Update of the Facility Pilot Client from 3.04 to 3.6.2 in English
Visualisation Server 2.3.4.6
Only for use in combination with the Facility Pilot from version 3.6.2 onwards (not for Client versions!).
Enables a visualisation based on HTML5 of the controls of the JUNG GUI (tested with Firefox, Safari and Chrome in the recent version).
Facility Pilot version 3.6.2 has to be installed before you install the visualisation server.
Windows 7 Home, Professional or Ultimate (32 and 64 Bit)
Windows 8 and 8.1 Pro (32 and 64 Bit).
Due to your system you may have to activate the Internet Information Services (IIS) in the control panel.
The Visualisation Server cannot be installed on: panels belonging to the series: PCT…FAPVD-GB, SP…FAPVD-GB and SP9FAPVE-GB!
Only for use in combination with the Facility Pilot from version 3.6.2 onwards (not for Client versions!).
Enables a visualisation based on HTML5 of the controls of the JUNG GUI (tested with Firefox, Safari and Chrome in the recent version).
Facility Pilot version 3.6.2 has to be installed before you install the visualisation server.
Windows 7 Home, Professional or Ultimate (32 and 64 Bit)
Windows 8 and 8.1 Pro (32 and 64 Bit).
Due to your system you may have to activate the Internet Information Services (IIS) in the control panel.
The Visualisation Server cannot be installed on: panels belonging to the series: PCT…FAPVD-GB, SP…FAPVD-GB and SP9FAPVE-GB!
Door communication
TK-IBS
DCM devices and installations have to be programmed with the DCM commissioning software. After commissioning you connect your PC with the respective tool TK-IBS-TOOL and transfer the data to the DCM system.
DCM devices and installations have to be programmed with the DCM commissioning software. After commissioning you connect your PC with the respective tool TK-IBS-TOOL and transfer the data to the DCM system.
Driver
This driver is required for the first installation of the DCM Commissioning software
This driver is required for the first installation of the DCM Commissioning software
CAE Symbols/Macros for WSCAD and E-Plan
All JUNG rail mounting KNX devices for the integration into wiring diagrams of your planning software.
Provided by WSCAD in the Data Portal WSCAD Universe: www.wscaduniverse.com
Provided by WSCAD in the Data Portal WSCAD Universe: www.wscaduniverse.com
JUNG WSCAD files
JUNG Macros EPLAN files
KNX product database complete
Database ETS4
Database ETS3f
Database ETS5
Software Smart Panel 9"
The Smart Panel is parameterised and put into operation with the "Smart Panel Designer" .
This software will be installed on your configuration-PC with an executable EXE file independently of the ETS.
The software simply allows the graphical configuration of displays and controls, as well as the configuration of the communication objects and function parameters.
The "Smart Panel Designer " runs on PCs with the operating systems Windows ® XP (only 32-bit), Vista, 7 and 8.
This software will be installed on your configuration-PC with an executable EXE file independently of the ETS.
The software simply allows the graphical configuration of displays and controls, as well as the configuration of the communication objects and function parameters.
The "Smart Panel Designer " runs on PCs with the operating systems Windows ® XP (only 32-bit), Vista, 7 and 8.
SP 9.1 KNX
An ETS product database with an embedded plug-in is available to calibrate the project data of the ETS project (group addresses, visible communication objects) and the configuration software.
FAPV-SERVER-REG Software-Update
Update of the FAP REG-SERVER to version 3.6.2 and update of the Vis-Server to version 2.3.4.6
REG-FAPV-EN-BasisUndServerUpdate-3.6.2-180130.zip:
- Batch for the update of the FAP-VisServers to version 2.3.4.6, and the FAP-Basicsoftware to Version 3.6.2
- only suitable for the ENGLISH version of the FAPV-Server-REG
Note: Please extract the ZIP file, execute the REG-FAP-Update-3.6.2.bat and follow the instructions to update the software.
Note: If the write protection is activated on the FAP REG-Server, it has to be deactivated and the system restarted. Important: Use both updates in the given order.
The update is NOT suitable for other hardware, only for the FAPV-SERVER-REG.
It causes uselessness on other systems.
REG-FAPV-EN-BasisUndServerUpdate-3.6.2-180130.zip:
- Batch for the update of the FAP-VisServers to version 2.3.4.6, and the FAP-Basicsoftware to Version 3.6.2
- only suitable for the ENGLISH version of the FAPV-Server-REG
Note: Please extract the ZIP file, execute the REG-FAP-Update-3.6.2.bat and follow the instructions to update the software.
Note: If the write protection is activated on the FAP REG-Server, it has to be deactivated and the system restarted. Important: Use both updates in the given order.
The update is NOT suitable for other hardware, only for the FAPV-SERVER-REG.
It causes uselessness on other systems.
FAP 3.6.2 and Vis-Server 2.3.4.6
Please copy update files to the FAPV-SERVER-REG, then extract and execute the files.
Please copy update files to the FAPV-SERVER-REG, then extract and execute the files.
Configuration Software Facility Pilot Navigator
Version 2.3
Setup for new installation and to update old versions
Setup for new installation and to update old versions
Configuration Software Facility Pilot Navigator
The application runs as Client-Server-system (port 8081).
System requirement:
Windows 7 Home, Professional and Ultimate (32 and 64 Bit)
Windows 8 and 8.1 Pro (32 and64 Bit)
Windows 10 (32 and 64 BIT)
For operation a HTML 5 compatible browser is required.
New installation: The software runs in demo mode after installation. To use all functions you have to activate it with costs. For this please use the portal “Get your licence” on https://www.jung.de/en/1508/.
Update: If you have already an activated version of Navigator, you just install the setup file to update your software tot he latest version 2.3.
The application runs as Client-Server-system (port 8081).
System requirement:
Windows 7 Home, Professional and Ultimate (32 and 64 Bit)
Windows 8 and 8.1 Pro (32 and64 Bit)
Windows 10 (32 and 64 BIT)
For operation a HTML 5 compatible browser is required.
New installation: The software runs in demo mode after installation. To use all functions you have to activate it with costs. For this please use the portal “Get your licence” on https://www.jung.de/en/1508/.
Update: If you have already an activated version of Navigator, you just install the setup file to update your software tot he latest version 2.3.
Smart Pilot FAP Software-Update Windows® XP embedded
Update of the Smart Pilot FAP to version 3.6.2 and update of the Vis-Server to version 2.3.4.3
Divus-WinXPEmbedded-DE-BasisUndServerUpdate-3.6.2-170413.zip:
- Batch for the update of the FAP-VisServers to version 2.3.4.3, and the FAP-Basicsoftware to Version 3.6.2
- only suitable for the ENGLISH version of the FAPV-Server-REG
Note: Please extract the ZIP file, execute the 3.6.bat and follow the instructions to update the software.
The update is NOT suitable for other hardware, only for the Smart Pilot FAP.
It causes uselessness on other systems.
Divus-WinXPEmbedded-DE-BasisUndServerUpdate-3.6.2-170413.zip:
- Batch for the update of the FAP-VisServers to version 2.3.4.3, and the FAP-Basicsoftware to Version 3.6.2
- only suitable for the ENGLISH version of the FAPV-Server-REG
Note: Please extract the ZIP file, execute the 3.6.bat and follow the instructions to update the software.
The update is NOT suitable for other hardware, only for the Smart Pilot FAP.
It causes uselessness on other systems.
FAP 3.6.2 and Vis-Server 2.3.4.6
Please copy update files to the Smart Pilot FAP, then extract and execute the files.
Please copy update files to the Smart Pilot FAP, then extract and execute the files.
Software Smart Panel 5"
The Smart Panel is parameterised and put into operation with the "Smart Panel Designer" .
This software will be installed on your configuration-PC with an executable EXE file independently of the ETS.
The software simply allows the graphical configuration of displays and controls, as well as the configuration of the communication objects and function parameters.
The "Smart Panel Designer " runs on PCs with the operating systems Windows ® XP (only 32-bit), Vista, 7 and 8.
This software will be installed on your configuration-PC with an executable EXE file independently of the ETS.
The software simply allows the graphical configuration of displays and controls, as well as the configuration of the communication objects and function parameters.
The "Smart Panel Designer " runs on PCs with the operating systems Windows ® XP (only 32-bit), Vista, 7 and 8.
SP 5.1 KNX
In Verbindung mit Datenbank Version 1.0.4.0.vd5
In Verbindung mit Datenbank Version 1.0.4.0.vd5
An ETS product database with an embedded plug-in is available to calibrate the project data of the ETS project (group addresses, visible communication objects) and the configuration software.