Back In use: Single family

IIn private building, the LB Management provides more convenience and energy effi ciency with control of light and shading according to need. Daily routines are made easier with automatic functions. Individual settings and variable operating possibilities improve living quality.
 



01. Hands-free lighting

Coming home in the dark and the hall light switches on automatically. You can set up this function in no time using a JUNG automatic switch or ceiling observer / presence detector. In the case of long or angled hallways, you extend the detection area easily with a 3-wire satellite unit and another automatic switch. The lighting switches off again automatically when nobody is present any more in the detection area. It goes without saying that the JUNG automatic switches also take account of the ambient brightness. The light stays off if there is suffi cient daylight. It’s that simple.

COMPONENTS
Relay switch insert 1-channel 1701 SE
3-wire satellite unit 1723 NE
Standard automatic switch 1.1 m ..17180..
Standard automatic switch 2.2 m ..17280..

Notes for the use of satellite units: No Standard centre plate may be used on the master unit if a 3-wire satellite unit is used. Maximum number of 3-wire satellite units is 5. Maximum total cable length 100 metres.

02. Alarm function

The automatic switching becomes a watchdog with a tap in the JUNG Clever Config app. The activated alarm function detects movement by persons and makes the lighting fl ash. Burglars are unsettled and deterred. Furthermore, the light signal possibly makes neighbours aware. The alarm function is initiated independent of brightness and can be used with other additional functions such as presence simulation. It goes without saying that you can also expand the detection area here with up to fi ve satellite units.

COMPONENTS
Relay switch insert 1-channel 1701 SE
3-wire satellite unit 1723 NE
Standard automatic switch 1.1 m ..17180..
Universal automatic switch 2.2 m ..17281..

Notes for the use of satellite units: No Standard centre plate may be used on the master unit if a 3-wire satellite unit is used. Maximum number of 3-wire satellite units is 5. Maximum total cable length 100 metres.

03. Automatic light for the guest toilet

Rooms without windows merit a movement detector; for example in the cellar, in the attic or in the garage. Thanks to automatic light, the guest toilet without windows also saves the search for the light switch. Would you like further added value? How about if the radio also plays music? This is not a problem with the JUNG Smart Radio! The movement detector switches off lighting and radio again automatically if movement is no longer detected.

COMPONENTS
Relay switch insert 1-channel 1701 SE
3-wire satellite unit 1723 NE
Standard automatic switch 1.1 m ..17180..
Smart Radio Set RAD..518..

04. Convenient lighting control with satellite unit

Getting up again to switch off the main lighting in the bedroom? You enhance the master unit with further control points using the 2-wire satellite unit. The range of functions is predefi ned by the master unit. Would you like even more comfort? The bedroom lighting can be dimmed with the Universal touch dimmer insert LED as master unit. Also using the satellite units.

COMPONENTS
Universal touch dimmer insert LED 1711 DE
2-wire satellite unit 1720 NE
Standard centre plate ..1700..

05. Shading complete areas using group control

Using the Universal blinds insert, you cascade the shading so that the blinds can be controlled flexibly individually, per room, per fl oor or per building — individually and conveniently. One Universal blinds insert controls one or more shading motors 1), another Universal blinds insert compiles multiple controls to a group. With the Standard Timer with Display as group controller, you control the entire shading installation automatically if required. Individually programmed or analogously to sunrise and sunset thanks to the astro function. The time program also takes over the raising and lowering of the blinds during holiday time. The automatic lowering of the
shutter can be suppressed using a Universal centre plate. Furthermore, a memory function enables two additional movement times for the connected motors.

COMPONENTS
Universal blinds insert 1731 JE
Standard centre plate ..1700 P..
Universal centre plate ..1701 P..
Standard timer ..1750 D..

1) Note the maximum motor connected load of 700 W, also for the control of multiple motors using one blind insert. If you want to switch multiple motors in parallel, the motors must be suitable for this. Alternatively, use isolating relays.

06. Automatic shading in the case of strong sunlight

You shade your living area comfortably and time-controlled with the JUNG timer attachments.Thanks to the astro function, nobody has to think any more about the programming or any changeover to summer or winter time. Your automated shading is complete if you also install a Bluetooth brightness and temperature sensor. The Bluetooth brightness and temperature sensors monitor the windows facing South and West. If a specifi ed brightness is exceeded, the shading moves down to protect the room against overheating and strong ultraviolet radiation. The brightness threshold, the shading position and the schedule can be set individually using the JUNG Clever Confi g app.

COMPONENTS
Universal blinds insert 1730 JE
Universal Bluetooth timer ..1751 PBT..
Brightness / temperature sensor Bluetooth 1792 HTBT

07. Lock-out prevention

Have you thought of everything? Can the shading be controlled individually, does it shade automatically in the case of strong sunlight and does it follow the astro function daily? We think a step further for you: With the practical lock-out prevention, you prevent the shutters closing automatically while there is still somebody present outdoors. You activate the lock-out prevention simply by pressing a button on the Universal centre plate.

COMPONENTS
Universal blinds insert 1731 JE
Universal centre plate ..1701 P..
Standard centre plate ..1700 P..

08. Presence simulation

With the JUNG presence simulation, the house or apartment has the effect of being occupied when the occupants are not at home. In normal operation, the individual switching times of the last 24 hours are stored permanently in the automatic switch. The oldest ones are overwritten if there are more than 60 switching operations. If the presence simulation has been activated using the Clever Confi g app, the lighting is switched on, depending on the brightness, at the times stored for the previous day. The switching off is performed as usual after expiry of the delay time. If any movement is detected, the light is also switched on or the delay time is extended. The automatic shading control can also be automated easily using the Clever Confi g app so that nobody has to look after the house during your holiday.

COMPONENTS
Relay switch insert 1-channel 1701 SE
3-wire satellite unit 1723 NE
Standard automatic switch 1.1 m ..17180..
Universal automatic switch 2.2 m ..17281..

Notes for the use of satellite units: No Standard centre plate may be used on the master unit if a 3-wire satellite unit is used. Maximum number of 3-wire satellite units is 5. Maximum total cable length 100 metres.
Notes for the use of satellite units: No Standard centre plate may be used on the master unit if a 3-wire satellite unit is used. Maximum number of 3-wire satellite units is 5. Maximum total cable length 100 metres.