KNX heating actuator 6-gang with controller

KNX heating actuator

The KNX 6-gang REG heating actuator operates by switching electrothermal drives for heating and cooling ceilings. It controls valve drives in both low voltage and the 230V ranges. Ideal areas of application are heating and cooling systems in private residential properties, hotels and public buildings such as schools etc.

The demand-based pump operation and the option of forced control of all the outputs optimise the performance features of this actuator in such a way that they rationally support the energy-efficient management of the heating. The "First Open" function for the simple initial setting in operation of the heating system works as a further important feature for activating the actuator drives. And the device is even best equipped for the "worst case scenario" – the breakdown of the bus voltage – as emergency operation is ensured through the external power supply (in a separate unit).

The new KNX heating actuator has six integrated temperature controllers and is thus even more flexible in use. For this concept, only one sensor per room that reports the measured room temperature to the actuator is required. All current KNX push-button modules in the F 40 and F 50 families as well as the new KNX automatic switch are suitable for this. For inexpensive individual room temperature control with more convenience.

To support the on-site start-up procedure and maintenance, all the outputs can be operated manually as usual – and even status reports are carried out by hand operation.

Please find more technical informationen about the KNX Heating actuator in the Online Catalogue

More information